What is how to pair sony wf-1000xm4?

Here's information about pairing the Sony WF-1000XM4 earbuds:

Pairing Your Sony WF-1000XM4

The Sony WF-1000XM4 earbuds are relatively straightforward to pair with your devices, but the process can vary slightly depending on whether you're pairing for the first time or connecting to a previously paired device.

First-Time Pairing:

1. Enable Bluetooth: Make sure Bluetooth is enabled on the device you want to pair with.
2. Put Earbuds in Pairing Mode:
   • Place both earbuds in the charging case.
   • Leave the lid open.
   • Press and hold the pairing button on the back of the case for about 5 seconds. The indicator lamp will flash blue, indicating that the earbuds are in pairing mode.
3. Select on Your Device: On your device's Bluetooth settings, look for "WF-1000XM4" in the list of available devices.
4. Connect: Select "WF-1000XM4" to connect. You may be prompted to enter a PIN (usually "0000").

Pairing with a Second Device (After Initial Setup):

1. Put Earbuds in Pairing Mode: Follow the same steps as above to put the earbuds in pairing mode (press and hold the pairing button on the case with the lid open).
2. Select on Your New Device: On the new device's Bluetooth settings, select "WF-1000XM4" from the list of available devices.
3. Connect: Connect to the earbuds.

Important Considerations:

• Google Fast Pair: The WF-1000XM4 supports Google Fast Pair on Android devices. If your Android device is nearby when you open the charging case, a notification will appear prompting you to connect.
• Bluetooth Connection Issues: If you encounter problems, try turning Bluetooth off and on again on your device. Also, ensure the earbuds are charged. You might also try resetting the earbuds (see Sony's support documentation for instructions).
• Multipoint Connection: These earbuds support multipoint%20connection, allowing you to be connected to two devices simultaneously. This feature needs to be enabled in the Sony Headphones Connect app.
• Sony Headphones Connect App: Download and install the Sony Headphones Connect app for iOS or Android. This app allows you to customize settings, update the firmware, and access additional features like EQ%20settings and noise cancellation control.
• Clearing Pairing Information: You can clear the pairing information if you're having issues or want to remove the earbuds from a device's memory. This is done through the Sony Headphones Connect app or by resetting the earbuds to factory settings (refer to Sony's instructions).